Commit graph

10504 commits

Author SHA1 Message Date
silverwind
4117a443c2
Lazy-load issue reviewers and assignees avatars (#13526)
The avatars inside the dropdowns were previously fetched every time a
Pull Request was opened resulting in potential unnecessary downloads.
This lazy-loads through the newish loading=lazy attribute.

Also did a few minor adjustments on the file.
2020-11-12 07:55:34 +02:00
GiteaBot
6838bacc4c [skip ci] Updated translations via Crowdin 2020-11-11 20:35:20 +00:00
zeripath
5d932b35ca
Disallow urlencoded new lines in git protocol paths if there is a port (#13521)
Signed-off-by: Andrew Thornton <art27@cantab.net>
2020-11-11 20:34:16 +00:00
zeripath
3fd060eb37
Include OriginalAuthor in Reaction constraint (#13505)
When migrating repositories with reactions with deleted users, the original
author id may be -1. This means that it is possible to end up attempting
to create multiple reactions with the same [ Type, IssueID, CommentID, UserID,
OriginalAuthorID ] thus breaking the constraints.

On SQLite this appears to cause a deadlock but on other dbs this will
cause the migration to fail.

This PR extends the constraint to include the original author username
in the constraint.

Fix #13271

Signed-off-by: Andrew Thornton <art27@cantab.net>
2020-11-10 22:37:11 +00:00
wULLSnpAXbWZGYDYyhWTKKspEQoaYxXyhoisqHf
3400928f7a
fix: issue tracker link redirection (#13504)
kudos to @zeripath
* in case there is a remote issue tracker configured, the git graph view
  PR and issue links now correctly point to the issue tracker location,
  whereas if literally pointing at 'pulls', you could have ended up back
  at the local instance after clicking the link (which, obviously haven't
  had the pull/issue)

Signed-off-by: wULLSnpAXbWZGYDYyhWTKKspEQoaYxXyhoisqHf <a_mirre@utb.cz>
2020-11-10 23:27:11 +02:00
silverwind
da4f2c5979
Make heatmap shades linear (#13500)
Previously, shades were 50%, 60%, 70%, 80%, 100%. Make them linearily
increasing instead at 60%, 70%, 80%, 90%, 100%.

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-10 14:51:58 -05:00
zeripath
13b8c0b7ae
Switch from SimpleMDE to EasyMDE (#13333)
* Switch from SimpleMDE to EasyMDE

Signed-off-by: Andrew Thornton <art27@cantab.net>

* use webpack to webpack the easymde css

Signed-off-by: Andrew Thornton <art27@cantab.net>

* move css to only css

Signed-off-by: Andrew Thornton <art27@cantab.net>

* move loading codemirror modes and addons back in to footer.tmpl

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Fix arc-green

Signed-off-by: Andrew Thornton <art27@cantab.net>

* as per @silverwind

* reinstall codemirror

Signed-off-by: Andrew Thornton <art27@cantab.net>

Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-10 14:16:30 -05:00
silverwind
21d496364a
Fix tooltips and issue dependency styles (#13458)
- Convert all tooltips to JS-based ones, fixing overflow issues
- Restyle issue dependencies/dependants
- Move popup styles to base style
- CSS Helper tweaks
- Unify pseudo element selectors and lint for it

Fixes: https://github.com/go-gitea/gitea/issues/13400
2020-11-10 20:28:07 +02:00
GiteaBot
9155f13bf8 [skip ci] Updated translations via Crowdin 2020-11-10 11:45:51 +00:00
Lunny Xiao
542edc22c4
Some improvements for v156 (#13497) 2020-11-10 13:44:45 +02:00
Mohammad Hadi Hosseinpour
beab1dd337
Added title and action buttons to Project view page (#13437)
* Added title and action buttons to Project view page

* Changed octicon for project close action

* Fix indentation in templates/repo/projects/view.tmpl

Co-authored-by: zeripath <art27@cantab.net>

* Fix indentation templates/repo/projects/view.tmpl (2nd)

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
2020-11-09 22:46:19 -05:00
zeripath
182b5a08ed
Prevent panic on git blame by limiting lines to 4096 bytes at most (#13470)
Fix #12440
Closes #13192

Signed-off-by: Andrew Thornton <art27@cantab.net>

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-09 21:14:02 -05:00
Cirno the Strongest
40c4466641
Fix broken .comment > .content caused by #13457 (#13482)
Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-09 20:43:08 -05:00
zeripath
77e5081a2e
Fix panic bug in handling multiple references in commit (#13486)
* Fix panic bug in handling multiple references in commit

The issue lay in determining the position of matches on a second run round
a commit message in FindAllIssueReferences.

Fix #13483

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Extract function and make testable

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Fix the comment

Signed-off-by: Andrew Thornton <art27@cantab.net>

* cleaning up the comments a bit more

Signed-off-by: Andrew Thornton <art27@cantab.net>
2020-11-10 00:57:47 +02:00
GiteaBot
ffa712e783 [skip ci] Updated translations via Crowdin 2020-11-09 18:22:53 +00:00
silverwind
8bae34c4b2
Change search and filter icons to SVG (#13473)
Unfortunately, the Fomantic CSS relies on i.icon instead of .icon so a
wrapper is necessary for these with an accompanying class to center the
icon.
2020-11-09 18:21:47 +00:00
GiteaBot
ef2ffc6aed [skip ci] Updated translations via Crowdin 2020-11-09 06:16:15 +00:00
zeripath
b091c994b5
Comments on review should have the same sha (#13448)
* When replying to an outdated comment it should not appear on the files page

This happened because the comment took the latest commitID as its base instead of the
reviewID that it was replying to.

There was also no way of creating an already outdated comment - and a
reply to a review on an outdated line should be outdated.

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix test

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Fix broken migration

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix mssql

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Create temporary table because ... well MSSQL ...

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Create temporary table because ... well MSSQL ...

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Create temporary table because ... well MSSQL ...

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix mssql

Signed-off-by: Andrew Thornton <art27@cantab.net>

* move session within the batch

Signed-off-by: Andrew Thornton <art27@cantab.net>

* regen the sqlcmd each time round the loop

Signed-off-by: Andrew Thornton <art27@cantab.net>

* as per @lunny

Signed-off-by: Andrew Thornton <art27@cantab.net>

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-11-09 01:15:09 -05:00
Simon Legner
1213301b50
docs(comparison): GitHub Actions (#13474)
https://github.com/features/actions
2020-11-08 17:35:28 -05:00
zeripath
271ab63dfa
Make TestCreateBranch and TestRepoCommitsSearch less noisy (#13471)
Signed-off-by: Andrew Thornton <art27@cantab.net>

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-08 16:24:54 -05:00
techknowlogick
8a7101fdd3
Add note about installation on kubernetes to docs (#13469)
Co-authored-by: zeripath <art27@cantab.net>
2020-11-08 15:50:40 -05:00
zeripath
8ae5548188
2nd attempt at re-request APIMergePullRequest (#13468)
Signed-off-by: Andrew Thornton <art27@cantab.net>
2020-11-08 19:23:00 +00:00
GiteaBot
004b40dad0 [skip ci] Updated translations via Crowdin 2020-11-08 18:03:03 +00:00
silverwind
049a87c402
Override fonts using Fomantic config (#13465)
Saves is from doing it manually and saves a few CSS bytes.

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-08 13:01:38 -05:00
zeripath
c05a8abc76
Multiple GitGraph improvements: Exclude PR heads, Add branch/PR links, Show only certain branches, (#12766)
* Multiple GitGraph improvements.

Add backend support for excluding PRs, selecting branches and files.

Fix #10327

Signed-off-by: Andrew Thornton <art27@cantab.net>

* as per @silverwind

Signed-off-by: Andrew Thornton <art27@cantab.net>

* as per @silverwind

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Only show refs in dropdown we display on the graph

Signed-off-by: Andrew Thornton <art27@cantab.net>

* as per @silverwind

Signed-off-by: Andrew Thornton <art27@cantab.net>

* use flexbox for ui header

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Move Hide Pull Request button to the dropdown

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Add SHA and user pictures

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix test

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix test 2

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fixes

* async

* more tweaks

* use tabs in tmpl

Signed-off-by: Andrew Thornton <art27@cantab.net>

* remove commented thing

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix linting

Signed-off-by: Andrew Thornton <art27@cantab.net>

* Update web_src/js/features/gitgraph.js

Co-authored-by: silverwind <me@silverwind.io>

* graph tweaks

* more tweaks

* add title

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix loading indicator z-index and position

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-08 12:21:54 -05:00
GiteaBot
d4e0b28655 [skip ci] Updated translations via Crowdin 2020-11-08 16:30:44 +00:00
silverwind
8411cb567a
Fix colors and triangles in issues (#13463)
- Fix misaligned triangles
- Fix triangle and header background colors
- Adjust timeline color
2020-11-08 16:29:18 +00:00
Cirno the Strongest
f719e2e806
Fix double border introduced by #13434 (#13457)
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
2020-11-07 18:15:09 -05:00
silverwind
9aa8693e2c
Frontpage and Heatmap CSS tweaks (#13443)
* Frontpage and Heatmap CSS tweaks

- Make heatmap use primary color
- Defined secondary color shades
- Set various blue colors to CSS vars
- Misc tweaks

* remove a useless variable

* remove another useless variable

Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-07 23:04:40 +02:00
Kyle Evans
e461f0854f
[RFC] Make archival asynchronous (#11296)
* Make archival asynchronous

The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.

This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.

Fixes #11265

* Archive links: drop initial delay to three-quarters of a second

Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly.  Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.

* archiver: restructure a little bit to facilitate testing

This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.

The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.

* gofmt nit: no space around binary + operator

* services: archiver: appease golangci-lint, lock queueMutex

Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast().  The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.

* archiver: tests: fix several timing nits

Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.

* archiver: tests: no underscore in var name, ungh

* archiver: tests: Test* is run in a separate context than TestMain

We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.

* archiver: tests: hopefully final tweak

Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.

* repo: Download: restore some semblance of previous behavior

When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.

This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.

* archiver: tests: simplify a bit further

We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.

else if isn't really necessary if the conditions are simple enough and lead
to the same result.

* archiver: tests: resolve potential source of flakiness

Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.

While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.

* archiver: setup infrastructure for notifying consumers of completion

This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.

* repo: archive: make GET endpoint synchronous again

If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.

* archiver: tests: amend test to include WaitForCompletion()

This is a trivial one, so go ahead and include it.

* archiver: tests: fix test by calling NewContext()

The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.

* archiver: tests: integrate new WaitForCompletion a little better

We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.

* archiver: tests: combine numQueued declaration with next-instruction assignment

* routers: repo: reap unused archiving flag from DownloadStatus()

This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.

* services: archiver: restructure to use a channel

We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout

In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.

* services: archiver: use defer to unlock now that we can

This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.

* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"

This reverts commit bcc52140238e16680f2e05e448e9be51372afdf5.

Revert "archiver: tests: integrate new WaitForCompletion a little better"

This reverts commit 9fc8bedb5667d24d3a3c7843dc28a229efffb1e6.

Revert "archiver: tests: fix test by calling NewContext()"

This reverts commit 709c35685eaaf261ebbb7d3420e3376a4ee8e7f2.

Revert "archiver: tests: amend test to include WaitForCompletion()"

This reverts commit 75261f56bc05d1fa8ff7e81dcbc0ccd93fdc9d50.

* archiver: tests: first attempt at WaitForCompletion() tests

* archiver: tests: slight improvement, less busy-loop

Just wait for the requests to complete in order, instead of busy-waiting
with a timeout.  This is slightly less fragile.

While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.

* archiver: address lint nits

* services: archiver: only close the channel once

* services: archiver: use a struct{} for the wait channel

This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.

* archiver: tests: fix expectations

Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.

The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.

* archiver: tests: set cchan to nil for comparison

* archiver: move ctx.Error's back into the route handlers

We shouldn't be setting this in a service, we should just be validating the
request that we were handed.

* services: archiver: use regex to match a hash

This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.

* routers: repo: remove the weird /archive/status endpoint

We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"

* archiver: tests: bump reasonable timeout to 15s

* archiver: tests: actually release timedReq

* archiver: tests: run through inFlight instead of manually checking

While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.

* initArchiveLinks: prevent default behavior from clicking

* archiver: alias gitea's context, golang context import pending

* archiver: simplify logic, just reconstruct slices

While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.

* archiver: don't block shutdown on waiting for archive

The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.

The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.

* archiver: simplify shutdown logic

We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.

* Style issues

* Fix mis-merge

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-07 22:27:28 +02:00
silverwind
1b65536aa0
Update JS dependencies (#13455)
- Update all JS dependencies minus Webpack
- Add postcss again to avoid warnings about missing peerDependencies

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-07 13:44:47 -05:00
silverwind
7c47e24093
Add Vue linting (#13447)
* Add Vue linting

Turns out the .vue files were not linted at all, so I added that as well
as re-indented the file to 2-space and fixed all reasonable issues that
cam up except one case of a unintended side effect for which I have no
idea how to fix it, so the rule was disabled.

* misc tweaks

* update lockfile

* use overrides to include .vue files

* treat warnings as errors on lint-frontend

* also treat stylelint warnings as errors

* use equal sign syntax

Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-11-07 23:11:09 +08:00
GiteaBot
ed47da2e29 [skip ci] Updated translations via Crowdin 2020-11-07 12:55:59 +00:00
Cirno the Strongest
48f8c5e1ae
Fix monospace font size for .mono CSS class (#13453) 2020-11-07 14:54:38 +02:00
a1012112796
82cf67a93e
updateSize when create a repo with init commit (#13441)
Signed-off-by: a1012112796 <1012112796@qq.com>

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
2020-11-06 23:44:08 -05:00
John Olheiser
172eca1cd3
Add docs command (#13429)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
2020-11-07 08:32:57 +08:00
6543
30ce3731a1
Vendor Update Go Libs (#13444)
* denisenkom/go-mssqldb untagged -> v0.9.0

* github.com/editorconfig/editorconfig-core-go v2.3.7 -> v2.3.8

* github.com/go-testfixtures/testfixtures v3.4.0 -> v3.4.1

* github.com/mholt/archiver v3.3.2 -> v3.5.0

* github.com/olivere/elastic v7.0.20 -> v7.0.21

* github.com/urfave/cli v1.22.4 -> v1.22.5

* github.com/xanzy/go-gitlab v0.38.1 -> v0.39.0

* github.com/yuin/goldmark-meta untagged -> v1.0.0

* github.com/ethantkoenig/rupture 0a76f03a811a -> c3b3b810dc77

* github.com/jaytaylor/html2text 8fb95d837f7d -> 3577fbdbcff7

* github.com/kballard/go-shellquote cd60e84ee657 -> 95032a82bc51

* github.com/msteinert/pam 02ccfbfaf0cc -> 913b8f8cdf8b

* github.com/unknwon/paginater 7748a72e0141 -> 042474bd0eae

* CI.restart()

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-06 13:41:42 -05:00
silverwind
eebaa81f43
Override fomantic monospace fonts and set size (#13435)
We did not override those yet so default `monospace` was applied. Also
added a tweak to slightly reduce font size because monospace fonts
usually render slightly larger than proportional ones.

Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-06 12:16:21 -05:00
techknowlogick
c178a36438
use registry mirror for docker-in-docker (#13438)
Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-06 02:35:10 -05:00
Lunny Xiao
35cc82abbf
Revert "Replies to outdated code comments should also be outdated (#13217)" (#13439)
This reverts commit 3cab3bee57.
2020-11-06 09:04:21 +02:00
GiteaBot
3c7908b51c [skip ci] Updated translations via Crowdin 2020-11-05 19:35:13 +00:00
silverwind
eba0ac5bf6
Rework focused comment styling (#13434)
Had to tweak a few borders to make it work properly in all cases, also
added .comment-body class to specifically target that body.
2020-11-05 21:34:04 +02:00
GiteaBot
5b636bdec7 [skip ci] Updated translations via Crowdin 2020-11-05 14:21:49 +00:00
John Olheiser
7c68ac8f7d
Tags cleanup (#13428)
* Tags cleanup

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* fmt

Signed-off-by: jolheiser <john.olheiser@gmail.com>
2020-11-05 08:20:42 -06:00
silverwind
05efb33595
Various style tweaks (#13418)
- Change code review '+' to SVG and increase size slightly
- Set placeholder color in both themes
- Set proper font for textareas
- Fix black code in arc-green
- Various arc-green fixes
2020-11-04 20:51:17 -05:00
mrsdizzie
d7e0983780
Alternative fix for HTML diff entity split (#13425)
* Alternative fix for HTML diff entity split

This commit both reverts PR #13357 and uses the exiting implementation alredy used for spans to fix the same issue. That PR duplicates most of logic that is already present elsewhere and still was failing for some cases. This should be simpler as it uses the existing logic that already works for <span>s being split apart.

Added both test cases as well.

* Update gitdiff_test.go

* fmt

* entity can have uppercase letter, also add detailed comment per @zeripath
2020-11-04 19:35:05 -05:00
GiteaBot
dd882f6a69 [skip ci] Updated translations via Crowdin 2020-11-04 22:56:17 +00:00
zeripath
3cab3bee57
Replies to outdated code comments should also be outdated (#13217)
* When replying to an outdated comment it should not appear on the files page

This happened because the comment took the latest commitID as its base instead of the
reviewID that it was replying to.

There was also no way of creating an already outdated comment - and a
reply to a review on an outdated line should be outdated.

Signed-off-by: Andrew Thornton <art27@cantab.net>

* fix test

Signed-off-by: Andrew Thornton <art27@cantab.net>

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-04 17:55:15 -05:00
Wim
fb756e7738
Add missing full names when DEFAULT_SHOW_FULL_NAME is enabled (#13417)
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-04 11:11:19 +02:00
GiteaBot
59c3cf6388 [skip ci] Updated translations via Crowdin 2020-11-04 07:15:15 +00:00