* Basic implementation of PKCE
Signed-off-by: Tadeusz Magura-Witkowski <tadeuszmw@gmail.com>
* @mfmarche on 24 Feb: when code_verifier is set, don't check client_secret
In PKCE flow, no client_secret is used, so the check for a valid client_secret
would always fail.
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* @deric on 16 Jun: return invalid_grant when wrong code_verifier
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Enforce PKCE flow on /token when PKCE flow was started on /auth
Also dissallow PKCE on /token, when PKCE flow was not started on /auth
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* fixed error messages when mixed PKCE/no PKCE flow.
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* server_test.go: Added PKCE error cases on /token endpoint
* Added test for invalid_grant, when wrong code_verifier is sent
* Added test for mixed PKCE / no PKCE auth flows.
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* cleanup: extracted method checkErrorResponse and type TestDefinition
* fixed connector being overwritten
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* /token endpoint: skip client_secret verification only for grand type authorization_code with PKCE extension
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Allow "Authorization" header in CORS handlers
* Adds "Authorization" to the default CORS headers{"Accept", "Accept-Language", "Content-Language", "Origin"}
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Add "code_challenge_methods_supported" to discovery endpoint
discovery endpoint /dex/.well-known/openid-configuration
now has the following entry:
"code_challenge_methods_supported": [
"S256",
"plain"
]
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Updated tests (mixed-up comments), added a PKCE test
* @asoorm added test that checks if downgrade to "plain" on /token endpoint
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* remove redefinition of providedCodeVerifier, fixed spelling (#6)
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
Signed-off-by: Bernd Eckstein <HEllRZA@users.noreply.github.com>
* Rename struct CodeChallenge to PKCE
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* PKCE: Check clientSecret when available
In authorization_code flow with PKCE, allow empty client_secret on /auth and /token endpoints. But check the client_secret when it is given.
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Enable PKCE with public: true
dex configuration public on staticClients now enables the following behavior in PKCE:
- Public: false, PKCE will always check client_secret. This means PKCE in it's natural form is disabled.
- Public: true, PKCE is enabled. It will only check client_secret if the client has sent one. But it allows the code flow if the client didn't sent one.
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Redirect error on unsupported code_challenge_method
- Check for unsupported code_challenge_method after redirect uri is validated, and use newErr() to return the error.
- Add PKCE tests to oauth2_test.go
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Reverted go.mod and go.sum to the state of master
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Don't omit client secret check for PKCE
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Allow public clients (e.g. with PKCE) to have redirect URIs configured
Signed-off-by: Martin Heide <martin.heide@faro.com>
* Remove "Authorization" as Accepted Headers on CORS, small fixes
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Revert "Allow public clients (e.g. with PKCE) to have redirect URIs configured"
This reverts commit b6e297b78537dc44cd3e1374f0b4d34bf89404ac.
Signed-off-by: Martin Heide <martin.heide@faro.com>
* PKCE on client_secret client error message
* When connecting to the token endpoint with PKCE without client_secret, but the client is configured with a client_secret, generate a special error message.
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* Output info message when PKCE without client_secret used on confidential client
* removes the special error message
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
* General missing/invalid client_secret message on token endpoint
Signed-off-by: Bernd Eckstein <Bernd.Eckstein@faro.com>
Co-authored-by: Tadeusz Magura-Witkowski <tadeuszmw@gmail.com>
Co-authored-by: Martin Heide <martin.heide@faro.com>
Co-authored-by: M. Heide <66078329+heidemn-faro@users.noreply.github.com>
Extracted test cases from OAuth2Code flow tests to reuse in device flow
deviceHandler unit tests to test specific device endpoints
Include client secret as an optional parameter for standards compliance
Signed-off-by: justin-slowik <justin.slowik@thermofisher.com>
This allows users of the LDAP connector to give users of Dex' login
prompt an idea of what they should enter for a username.
Before, irregardless of how the LDAP connector was set up, the prompt
was
Username
[_________________]
Password
[_________________]
Now, this is configurable, and can be used to say "MyCorp SSO Login" if
that's what it is.
If it's not configured, it will default to "Username".
For the passwordDB connector (local users), it is set to "Email
Address", since this is what it uses.
Signed-off-by: Stephan Renatus <srenatus@chef.io>
The bcrypt hashing algorithm runtime grows exponentially with cost,
and might cause a timeout if the cost is too high. Notifying the user
of high cost and of long running calculations will help with tuning
and debugging.
The "at_hash" claim, which provides hash verification for the
"access_token," is a required claim for implicit and hybrid flow
requests. Previously we did not include it (against spec). This
PR implements the "at_hash" logic and adds the claim to all
responses.
As a cleanup, it also moves some JOSE signing logic out of the
storage package and into the server package.
For details see:
https://openid.net/specs/openid-connect-core-1_0.html#ImplicitIDToken
The server implements a strategy called "Refresh Token Rotation" to
ensure refresh tokens can only be claimed once.
ref: https://tools.ietf.org/html/rfc6819#section-5.2.2.3
Previously "refresh_token" values in token responses where just the
ID of the internal refresh object. To implement rotation, when a
client redeemed a refresh token, the object would be deleted, a new
one created, and the new ID returned as the new "refresh_token".
However, this means there was no consistent ID for refresh tokens
internally, making things like foreign keys very hard to implement.
This is problematic for revocation features like showing all the
refresh tokens a user or client has out.
This PR updates the "refresh_token" to be an encoded protobuf
message, which holds the internal ID and a nonce. When a refresh
token is used, the nonce is updated to prevent reuse, but the ID
remains the same. Additionally it adds the timestamp of each
token's last use.
Accept the following response_type for the implicit flow:
id_token
token id_token
And the following for hybrid flow
code id_token
code token
code token id_token
This corrects the previous behavior of the implicit flow, which
only accepted "token" (now correctly rejected).
This PR reworks the web layout so static files can be provided and
a "themes" directory to allow a certain degree of control over logos,
styles, etc.
This PR does NOT add general support for frontend customization,
only enough to allow us to start exploring theming internally.
The dex binary also must now be run from the root directory since
templates are no longer "compiled into" the binary.
The docker image has been updated with frontend assets.
Ensure compared times are within a second of one another instead of
rounding, which can flake if the two times are different enough to
do round to different values.
Tested using the golang.org/x/tools/cmd/stress tool.
The following set of commands fail without this patch:
$ go get golang.org/x/tools/cmd/stress
$ go test -o server.test github.com/coreos/dex/server
$ stress ./server.test -test.run=TestOAuth2CodeFlow
219 runs so far, 0 failures
425 runs so far, 0 failures
618 runs so far, 0 failures
802 runs so far, 0 failures
^C
Closes#699
Instead of throwing a 500 error if a user enters an invalid name,
display the same text box as if the user had entered the wrong
password.
NOTE: An invalid username now returns much quicker than an invalid
password. Consider adding an arbitrary sleep in the future if we
care about masking which was invalid.
