dex/vendor/gopkg.in/square/go-jose.v1/doc_test.go

227 lines
6.6 KiB
Go
Raw Normal View History

2016-07-26 01:30:28 +05:30
/*-
* Copyright 2014 Square Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package jose
import (
"crypto/ecdsa"
"crypto/rand"
"crypto/rsa"
"fmt"
)
// Dummy encrypter for use in examples
var encrypter, _ = NewEncrypter(DIRECT, A128GCM, []byte{})
func Example_jWE() {
// Generate a public/private key pair to use for this example. The library
// also provides two utility functions (LoadPublicKey and LoadPrivateKey)
// that can be used to load keys from PEM/DER-encoded data.
privateKey, err := rsa.GenerateKey(rand.Reader, 2048)
if err != nil {
panic(err)
}
// Instantiate an encrypter using RSA-OAEP with AES128-GCM. An error would
// indicate that the selected algorithm(s) are not currently supported.
publicKey := &privateKey.PublicKey
encrypter, err := NewEncrypter(RSA_OAEP, A128GCM, publicKey)
if err != nil {
panic(err)
}
// Encrypt a sample plaintext. Calling the encrypter returns an encrypted
// JWE object, which can then be serialized for output afterwards. An error
// would indicate a problem in an underlying cryptographic primitive.
var plaintext = []byte("Lorem ipsum dolor sit amet")
object, err := encrypter.Encrypt(plaintext)
if err != nil {
panic(err)
}
// Serialize the encrypted object using the full serialization format.
// Alternatively you can also use the compact format here by calling
// object.CompactSerialize() instead.
serialized := object.FullSerialize()
// Parse the serialized, encrypted JWE object. An error would indicate that
// the given input did not represent a valid message.
object, err = ParseEncrypted(serialized)
if err != nil {
panic(err)
}
// Now we can decrypt and get back our original plaintext. An error here
// would indicate the the message failed to decrypt, e.g. because the auth
// tag was broken or the message was tampered with.
decrypted, err := object.Decrypt(privateKey)
if err != nil {
panic(err)
}
fmt.Printf(string(decrypted))
// output: Lorem ipsum dolor sit amet
}
func Example_jWS() {
// Generate a public/private key pair to use for this example. The library
// also provides two utility functions (LoadPublicKey and LoadPrivateKey)
// that can be used to load keys from PEM/DER-encoded data.
privateKey, err := rsa.GenerateKey(rand.Reader, 2048)
if err != nil {
panic(err)
}
// Instantiate a signer using RSASSA-PSS (SHA512) with the given private key.
signer, err := NewSigner(PS512, privateKey)
if err != nil {
panic(err)
}
// Sign a sample payload. Calling the signer returns a protected JWS object,
// which can then be serialized for output afterwards. An error would
// indicate a problem in an underlying cryptographic primitive.
var payload = []byte("Lorem ipsum dolor sit amet")
object, err := signer.Sign(payload)
if err != nil {
panic(err)
}
// Serialize the encrypted object using the full serialization format.
// Alternatively you can also use the compact format here by calling
// object.CompactSerialize() instead.
serialized := object.FullSerialize()
// Parse the serialized, protected JWS object. An error would indicate that
// the given input did not represent a valid message.
object, err = ParseSigned(serialized)
if err != nil {
panic(err)
}
// Now we can verify the signature on the payload. An error here would
// indicate the the message failed to verify, e.g. because the signature was
// broken or the message was tampered with.
output, err := object.Verify(&privateKey.PublicKey)
if err != nil {
panic(err)
}
fmt.Printf(string(output))
// output: Lorem ipsum dolor sit amet
}
func ExampleNewEncrypter_publicKey() {
var publicKey *rsa.PublicKey
// Instantiate an encrypter using RSA-OAEP with AES128-GCM.
NewEncrypter(RSA_OAEP, A128GCM, publicKey)
// Instantiate an encrypter using RSA-PKCS1v1.5 with AES128-CBC+HMAC.
NewEncrypter(RSA1_5, A128CBC_HS256, publicKey)
}
func ExampleNewEncrypter_symmetric() {
var sharedKey []byte
// Instantiate an encrypter using AES128-GCM with AES-GCM key wrap.
NewEncrypter(A128GCMKW, A128GCM, sharedKey)
// Instantiate an encrypter using AES256-GCM directly, w/o key wrapping.
NewEncrypter(DIRECT, A256GCM, sharedKey)
}
func ExampleNewSigner_publicKey() {
var rsaPrivateKey *rsa.PrivateKey
var ecdsaPrivateKey *ecdsa.PrivateKey
// Instantiate a signer using RSA-PKCS#1v1.5 with SHA-256.
NewSigner(RS256, rsaPrivateKey)
// Instantiate a signer using ECDSA with SHA-384.
NewSigner(ES384, ecdsaPrivateKey)
}
func ExampleNewSigner_symmetric() {
var sharedKey []byte
// Instantiate an signer using HMAC-SHA256.
NewSigner(HS256, sharedKey)
// Instantiate an signer using HMAC-SHA512.
NewSigner(HS512, sharedKey)
}
func ExampleNewMultiEncrypter() {
var publicKey *rsa.PublicKey
var sharedKey []byte
// Instantiate an encrypter using AES-GCM.
encrypter, err := NewMultiEncrypter(A128GCM)
if err != nil {
panic(err)
}
// Add a recipient using a shared key with AES-GCM key wap
err = encrypter.AddRecipient(A128GCMKW, sharedKey)
if err != nil {
panic(err)
}
// Add a recipient using an RSA public key with RSA-OAEP
err = encrypter.AddRecipient(RSA_OAEP, publicKey)
if err != nil {
panic(err)
}
}
func ExampleNewMultiSigner() {
var privateKey *rsa.PrivateKey
var sharedKey []byte
// Instantiate a signer for multiple recipients.
signer := NewMultiSigner()
// Add a recipient using a shared key with HMAC-SHA256
err := signer.AddRecipient(HS256, sharedKey)
if err != nil {
panic(err)
}
// Add a recipient using an RSA private key with RSASSA-PSS with SHA384
err = signer.AddRecipient(PS384, privateKey)
if err != nil {
panic(err)
}
}
func ExampleEncrypter_encrypt() {
// Encrypt a plaintext in order to get an encrypted JWE object.
var plaintext = []byte("This is a secret message")
encrypter.Encrypt(plaintext)
}
func ExampleEncrypter_encryptWithAuthData() {
// Encrypt a plaintext in order to get an encrypted JWE object. Also attach
// some additional authenticated data (AAD) to the object. Note that objects
// with attached AAD can only be represented using full serialization.
var plaintext = []byte("This is a secret message")
var aad = []byte("This is authenticated, but public data")
encrypter.EncryptWithAuthData(plaintext, aad)
}